Additional options

Turbo

The "Turbo" function can be used to reduce the program run-times, in programs in which the option is available.

￿Turn the dishwasher on "￿". The "Start / Stop" indicator flashes.

￿Press the "Turbo" button.

The "Turbo" indicator lights up.

The option will remain active for all programs until the setting is changed again.

￿A program can now be started as usual or the dishwasher can be turned off "￿".

Default settings

All settings can be reset to the factory default.

￿Turn the dishwasher off "￿".

￿Press and hold the "Start / Stop" button and at the same time turn the dishwasher on "￿". Hold the "Start / Stop" button until the indicator lights up.

If it does not come on, start over.

￿Press the "Delay Start" button 12 times.

The "Rinse & Hold" indicator gives one long flash and two short flashes in intervals.

The "Rinse" indicator lights up showing that a setting other than the factory default has been set.

If the "Rinse" indicator light is flashing:

All settings are factory default.

If the "Rinse" indicator is not lit up: At least one setting has been altered from the factory defaults

￿To reset the dishwasher to the factory default settings, press the "Start / Stop" button.

The setting is saved.

￿Turn the dishwasher off "￿".

31

Page 31
Image 31
Miele G 2143 manual Additional options, Turbo, Default settings