Miele G 2420 G 2430 operating instructions Plumbing, Connection to the water supply

Models: G 2420 G 2430

1 60
Download 60 pages 57.34 Kb
Page 56
Image 56
Plumbing

Plumbing

Connection to the water supply

,Do not drink water from the dishwasher!

The dishwasher can heat its own water to the temperature required by the wash program. This allows for connection of the machine to either a hot or cold water source. For lowest energy consumption connect the dishwasher to a cold water source. For fastest possible wash times, with slightly higher energy consumption, connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles.

The inlet hose is approx. 5 ft. (1.5 m) long. A 5 ft (1.5 m) flexible metal hose (pressure resistant up to 2030 psi) is available.

The water inlet hose comes equipped with a 3/4" female hose thread connector. This can be directly connected to a water supply with 3/4" MHT (male hose thread ends).

Water pressure: Must be between 4.5 - 145 psi (0.3 - 10 bar).

,Do not cut the intake hose. It contains electrical wiring. If the hose is cut, the dishwasher will not work. There will be a waterleak and you could be injured. If the hose is too long, coil it neatly and place it behind the machine.

56

Page 56
Image 56
Miele G 2420 G 2430 operating instructions Plumbing, Connection to the water supply