Frequently asked questions
Issue | Possible fault | Fix |
Dishes are not dry, | The rinse aid setting may be | Increase the dosage, refill |
glasses and cutlery | too low, or the rinse aid | the reservoir or switch the |
are spotted. | reservoir is empty. | rinse aid product when |
|
| refilling, see "Before using |
|
| for the first time". |
| Dishes were taken out too | Leave dishes in longer, see |
| soon. | "Use". |
| A "2 in 1" product was used. | Set the Detergent setting to |
| These products have a low | "Powder" and add rinse aid. |
| drying effect. |
|
| The Detergent setting "2 in | Set the Detergent setting to |
| 1" or "Gel" is turned on, but | the detergent used, see |
| another product was used. | "Detergent settings". |
White residue is | Not enough rinse aid was | Increase the dosage, see |
visible on cutlery | used. | "Before using for the first |
and dishes. |
| time". |
Clouding occurs on | The salt container is empty. | Refill the salt container, see |
glassware and film |
| "Before using for the first |
can be wiped off. |
| time". |
| The salt container lid was | Reseat it making sure it |
| not correctly screwed on. | screws back on correctly. |
| Unsuitable "2 in 1" or "Gel" | Change detergent, use |
| products were used. | normal tabs or normal |
|
| powder detergent. |
| The automatic water | Contact Miele’s Technical |
| softener unit is defective. | Service. |
41
