Before using for the first time

Adjusting the dosage

The dosage selector is preset to 3. This dispenses approximately 3 ml of rinse aid per program. It can be adjusted from 0 to 6.

Use a higher setting if spots appear on dry glassware.

￿Use a lower setting if streaking appears on dishes or glasses.

￿Turn the dishwasher off "￿".

￿Press and hold the "Program" button and at the same time turn the dishwasher on ￿.

Hold the "Program" button until the "Rinse & Hold" indicator comes on.

If it does not come on start over.

￿Press the "Program" button three times.

The "Intake / Drain" indicator flashes three times in intervals.

The "SaniWash" indicator flashes 3 times in intervals.

The rinse aid dosage is adjusted to 3 ml by default.

The amount set can be recognized by the flashing rhythm of the "SaniWash" indicator (see table):

Dosage in ml

Flashing rhythm

 

 

0

-

 

 

1

Once

 

 

2

Twice

3

3 times

 

 

4

4 times

 

 

5

5 times

 

 

6

6 times

￿Press and hold the "Program" button until the "Intake / Drain" indicator lights up.

￿Select the desired setting with the "Program" button. Every touch of the button increases the level.

The programmed dosage is saved.

￿Turn the dishwasher off "￿".

12

Page 12
Image 12
Miele G 4275, G 4270 manual Adjusting the dosage