Additional options

Buzzer

A signal sounds at the end of a program and when a fault occurs.

The buzzer at the end of a program sounds five times in quick succession for up to one hour.

The buzzer for a fault sounds continuously for up to two minutes.

The buzzer is activated by default. It can be turned off, so it does not sound at the end of a program. The buzzer for a fault cannot be turned off.

￿Open the door.

￿Turn the dishwasher off with "￿".

￿Press the "Program" button and at the same time turn the dishwasher on with "￿".

￿Hold the program button until the "Rinse & Hold" program indicator comes on.

If it does not come on, start over.

￿Press the "Program" button four times.

The "Intake / Drain" indicator flashes four times in intervals.

The setting can be recognized by the flashing of the "SaniWash" indicator:

flashing: buzzer is activated

not lit up: buzzer is deactivated

￿To change the setting press the "Program" button for at least one second, until the "Intake / Drain" indicator lights up.

￿Press the "Program" button. The setting is saved.

￿Turn the dishwasher off "￿".

29

Page 29
Image 29
Miele G 4270, G 4275 manual Additional options, Buzzer