Additional options
Optimize Standby
A few minutes after the last button is pressed or a few minutes after the end of the program the dishwasher will switch to Standby mode to save energy. The time display and the indicator lights are turned off and only the indicator light flashes slowly.
If the dishwasher is not turned off after the program ends, after a few minutes in Standby mode it will turn off completely.
You can also deactivate the Optimize Standby function. The time display and the indicator lights do not go out, and the dishwasher turns off 6 hours after the end of the program.
This results in higher energy consumption.
If Salt and/or Rinse aid or a fault is displayed, the dishwasher will not switch to Standby mode.
Open the door.
Press the button to turn the dishwasher off.
Press and hold the Program button and simultaneously turn the dishwasher on using the button. Keep the Program button pressed for at least four seconds until the lower right program indicator lights up.
If it does not come on, start over.
Press the Turbo button eight times.
The Turbo indicator light shows 8 short flashes in intervals.
The flashing in the time display shows whether Optimizing Standby is turned on.
–"p 1": Optimize Standby is on.
–"p 0": Optimize Standby is off.
Press the Program button if you wish to change the setting.
The setting is immediately saved.
Press the button to turn the dishwasher off.
40
