Settings menu
Rinse aid
For best results the rinse aid dosage can be adjusted.
The dosage can be set between
3 ml rinse aid.
The amount of rinse aid dispensed may be more than the value set due to the automatic adjustment of the "Sensor Wash" program.
If spots appear on the dishes:
– Use a higher setting for rinse aid.
If smearing or streaking show:
– Use a lower setting for rinse aid.
Select the desired rinse aid amount and confirm with the center button.
Optimize standby
A few minutes after the last key is pressed or at the end of the program the dishwasher will switch into Standby mode to save energy. The display and the indicators are turned off and only the Start/Stop indicator light flashes slowly.
If the dishwasher is not turned off after the program ends, it will turn completely off after a few minutes in Standby mode.
This function can also be turned off. The display and the indicators stay on and the dishwasher will turn off after approx. 6 hours.
Select the desired setting and press the center button.
If refill salt and/or rinse aid or a fault are present in the display, the dishwasher will not turn off.
The refill messages can be turned off when you use a tab detergent (see
42
