Triple filter system, Cleaning the triple filter | Miele G 5505

Cleaning and Care

Triple filter system

The triple filter system in the base of the wash cabinet retains coarse dirt from the suds solution, preventing it from reaching the circulation system and re-entering the cabinet through the spray arms.

The dishwasher must not be used without all the filters in place.

Collection of coarse dirt may cause the filters to clog. The level of soiling and time it takes before the filters need cleaning will vary depending on your household use.

The message Check filters will appear in the display after every 50 program cycles (factory default setting).

The filter check frequency can be set from 30 and 60 program cycles (see "Settings, filter check").

Check the triple filter system.

Clean the triple filter, if necessary.

Confirm the message with the center button.

The display changes to the Main menu.

Cleaning the triple filter

Turn the dishwasher off.

Turn the handle counter-clockwise to release the triple filter system .

Remove the triple filter system from the machine . Clean any solid particles and rinse the filter well under running water. Scrub with a nylon brush if necessary.

Make sure that when cleaning the filters, no coarse dirt falls into the circulation system, causing a blockage.

57

Image 57

Miele G 5505, G 5510, G 5500, G 5515 manual Triple filter system, Cleaning the triple filter

Contents

Operating Instructions Dishwasher 5500 G 5505 G 5510 G Contents Contents Correct usage Electrical Safety Installation Disposal of an appliance Use Guide to the dishwasher Control panel Energy saving washing Caring for the environment Before using for the first time To open the door Child safety lockTo close the door Display Functions Settings menu Water hardness Language Filling the salt container Refill salt message Adding rinse aid Rinse aid Rinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Universal support bar Jumbo cup rack Adjusting the height Adjusting the upper basket Lower basket To remove the insert Removable MultiComfort insertTo replace the insert Glass rack Foldable spikes Split cutlery tray Cutlery Cutlery insert for the cutlery basket Cutlery basket MieleCare Collection Optional accessories Detergent Use Adding detergent Turning on Selecting a programStarting a program Program Guide Program When to use Program sequence Standby Time display Preparing your appliance for an extended vacation At the end of a program Changing a program Interrupting a program Additional options Intensive lower basketTurbo Starting a program before the Delay start has elapsed Delay start Language Settings menu Water hardness Optimize standby Soak Refill indicatorsPre-rinse Extended drying Leaving the Settings menu Factory defaultContrast Filter check Technical faults Frequently Asked Questions Faults in the water intake/water drain Problem Possible fault Solution One of the followingFaults appears on General problems with the dishwasher Sounds Poor cleaning results Glasses Problem Possible fault Solution Dishes are not dryCutlery are Spotted Brown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored film PC Update After sales serviceRepairs MieleCare Transport Page User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door seal Triple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray arms Cleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Grounding Instructions Electrical connection Grounding Instructions This Appliance Must be Grounded Hardwired electrical connection Connection to the water supply Plumbing Venting the drainage system Drainage