Miele G 7883 operating instructions Loading the machine, Remove debris

Loading

The following instructions relate only to basic preparation and loading of glassware. There are additional requirements for particular applications.

Loading the machine

Remove debris

^Empty all glassware before loading into the machine.

Ensure that no acid or solvent residues, especially hydrochloric acid or chlorides, get into the wash cabinet.

^Remove all agar residue from petri dishes.

^Remove blood clots and residue from test tubes, etc.

^Remove all stoppers, corks, labels, sealing wax residue, etc.

Note

^Load items so that water will cover all surfaces. This ensures that they will be properly cleaned.

^Do not place items to be cleaned inside of other pieces, where they may be concealed.

^Hollow vessels, such as beakers, graduated cylinders, flasks, etc., should be inverted and placed in the correct inserts to ensure proper cleaning. A cover net can be used to reduce the risk of glass breakage during the wash process.

^Petri dishes and similar items should be placed in the correct insert with the soiled side facing center.

^Pipettes should be placed with the narrow end pointing down.

^Deep-based items should be placed at an angle to allow water to run off easily.

^Tall, narrow pieces should be placed in the center of the basket for best water coverage.

^The spray arms must not be blocked by items that are too tall or hang through baskets. Check clearance by manually rotating the spray arms.

24