Miele G 841 SC PLUS, G 841 PLUS manual Programming the water softener, Example

Before using for the first time

Programming the water softener

Your water hardness level must be pro- grammed into the dishwasher using the program selector and buttons on the control panel.

^Make sure the dishwasher is turned off.

^Turn the program selector to "Stop".

^Press and hold the "Start" button and at the same time turn on the dish- washer with the "On/Off" button. Re- lease the "Start" button within two seconds.

The "Salt" indicator will flash.

If the "Rinse aid" indicator comes on, the rinse aid dispenser needs to be filled.

If any other indicator flashes or lights, the above steps must be repeated.

^Turn the program selector to the posi- tion which corresponds to the water hardness in your area (see table).

					Selector
gr/gal*		ppm			setting
1 -	4**	20	-	70	Normal Plus
5	- 7	90	-	130	Normal
8	- 10	140	-	180	Rinse & Hold
11	- 13	200	-	230	4 o’clock position
14	- 16	250	-	290	5 o’clock position
17	- 22	310	-	400	6 o’clock position
23	- 35	410	-	630	7 o’clock position
36	- 70	650	- 1260		8 o’clock position

*US gallons

**factory preset

Example:

Water hardness is 20 gr/gal.

Turn program selector to "6 o’clock" position.

15