Frequently asked questions
What if ... | Possible fault | Fix |
dishes are not dry, | The rinse aid setting may | Increase the dosage or |
glasses and cutlery are | be too low, or the rinse aid | refill the reservoir, see "Be- |
spotted? | reservoir is empty. | fore using for the first |
|
| time". |
| Dishes were taken out too | Leave dishes in longer. |
| soon. |
|
white residue is visible | Not enough rinse aid was | Increase the dosage, see |
on cutlery and dishes, | used. | "Before using for the first |
clouding occurs on |
| time". |
glassware and film can | The salt reservoir is | Add reactivation salt, see |
be wiped off? | empty. | "Before using for the first |
|
| time". |
| The salt reservoir cap was | Reseat it making sure it |
| not correctly screwed on. | screws back on correctly. |
| The incorrect detergent | Only use powder deter- |
| was used. | gent or tablets. |
there are smears on | The rinse aid dosage is | Reduce the dosage, see |
glasses and cutlery, blu- | set too high. | "Before using for the first |
ish sheen on the surface |
| time". |
of glasses and film can |
|
|
be wiped off? |
|
|
40