Before using for the first time
Programming the water softener
Your water hardness level must be pro- grammed into the dishwasher using the buttons on the control panel.
The programming can be cancelled and restarted at any time by turning the dishwasher off with the "On/Off" button (13).
^Make sure the dishwasher is turned off.
^Press and hold the "Top Solo" (20) and "Start/Stop" (18) buttons and at the same time turn on the dishwasher with the "On/Off" (13) button. Release all buttons.
The "Rinse" (16) indicator will light and the "Salt" (15) indicator will flash.
If this is not the case, the above steps must be repeated.
a4 will flash in the delay start display.
^Use the program selection buttons (21) to select the value which corre- sponds to the water hardness in your area (see Table 1).
The selected value will appear in the time display.
To store the programmed water hard- ness:
^Press the "Start/Stop" (18) button twice.
The "Start/Stop" (18) indicator will flash.
^Turn off the dishwasher.
15
