Frequently asked questions
What if … | Possible fault | Fix |
the "End", "Start/Stop" | There may be a technical | – Press the "Start/Stop" |
and "Top Solo" indica- | fault. | button. |
tors flash at the same |
| – Turn off the dishwasher. |
time at the end of a pro- |
| A few seconds later: |
gram? |
| |
| – Turn the dishwasher on. | |
|
| |
|
| – Select a program. |
|
| – Press the "Start/Stop" |
|
| button. |
|
| If the indicators flash |
|
| again, there is a technical |
|
| problem. |
|
| – Call the Miele Technical |
|
| Service Department. |
there is a knocking | The spray arm is hitting | Interrupt the program, re- |
noise in the wash cabi- | an item in the basket. | arrange items blocking |
net? |
| the spray arms. |
there is a rattling noise? | Items are not secure in | Interrupt the program and |
| the wash cabinet. | rearrange loose pieces. |
there is a knocking | This may be caused by | This has no effect on the |
noise in the water | the installation or the di- | dishwasher. If in doubt |
pipes? | ameter of pipe. | contact a plumber. |
dishes are not dry, | The rinse aid setting may | Increase the dosage or |
glasses and cutlery are | be too low, or the rinse aid | refill the reservoir, see "Be- |
spotted? | reservoir is empty. | fore using for the first |
|
| time". |
| Dishes were taken out too | Leave dishes in longer. |
| soon. |
|
41