![Safety feature](/images/new-backgrounds/65728/6572823x1.webp)
Using the cooktop
Safety feature
This gas cooktop incorporates an Ignition Safety Control which stops the supply of gas if the flame goes out,
[] To reignite the burners, turn the control knob clockwise to "®", then follow the procedures outlined in "Turning on and off",
This safety feature is not operated by electricity, it will be active even if the
appliance is in use during a power failure,
Using the cooktop during a power failure
If there is an interruption to the electrical supply, the gas can be ignited using a match,
[] Press down on the desired control knob and turn it counterclockwise to the large flame symbol,
[] While holding down the knob, light the gas at the burner with a match,
[] When the flame appears, keep the control knob pressed in for
8 - 10 seconds to allow the Ignition Safety Control to reach operating temperature,
12