Cleaning and care
Burner
The burner can be dismantled and cleaned when cool.
Dismantling and cleaning
^Remove the burner parts and wash them in a solution of warm water and liquid dish soap
^Dry thoroughly. Make sure that the flame holes are clean and completely dry.
The shiny surfaces of the burner caps will dull with time and use. This is normal and will not affect the operation of the cooktop.
^Clean the burner base, ignitor and Ignition Safety Control with a damp cloth and then dry.
The ignitor must be thoroughly dry, or it will not spark.
Reassembling the burner
^Fit the burner onto the burner base, a.
^Fit the burner ring.
^Put the large burner cap on the large burner cap base, b.
^Fit the small burner cap.
^Put the grate in place, c.
^Put the trivet in place if needed.
Be careful not to mix up the parts. Make sure that all the notches and holes align exactly.
16
