Cleaning and care
Appliance front and control panel
^All surfaces and controls should be cleaned using warm water with a little washing up liquid applied with a soft sponge or cloth.
^Wipe the surfaces dry using a soft cloth.
To prevent the risk of scratches and damage to the surface structure of your appliance, please pay particular attention to the following cleaning instructions.
Controls
The controls may suffer discolouration or damage if soiling is left on them for too long. Remove any soiling straight away.
Avoid:
–cleaning agents containing soda, acids or chlorides,
–abrasive cleaning agents, e.g. powder cleaners and cream cleaners,
–abrasive sponges, e.g. pot scourers or sponges which have been previously used with abrasive cleaning agents,
–stainless steel cleaners,
–oven sprays.
Glass fronted appliances
The surfaces and controls are susceptible to scratches and abrasions.
Avoid:
–abrasive cleaning agents, e.g. powder cleaners and cream cleaners,
–abrasive sponges, e.g. pot scourers or sponges which have been previously used with abrasive cleaning agents,
–oven sprays.
Stainless steel fronted appliances
The surfaces and controls are susceptible to scratches and abrasion.
Stainless steel surfaces can be cleaned with a proprietary
N.B. Do not use it on the controls.
Avoid:
–cleaning agents containing soda, acids or chlorides,
–abrasive cleaning agents, e.g. powder cleaners and cream cleaners,
–abrasive sponges, e.g. pot scourers or sponges which have been previously used with abrasive cleaning agents.
To help prevent
47
