HOW TO ASSEMBLE / OPERATE YOUR CLEANER
A) HANDLE ASSEMBLY
Hose clip
1)Align the handle with the body of the cleaner as shown in the illustration.
2)Insert the base of the handle into the top of the body of the machine. Push in handle and tighten the screw. The screw can be found in the
bag with these operating instructions. IMPORTANT: Do not over tighten the screw.
3)Place the hose under the hose clip. Push in to secure. NOTE: Always store the hose in the clockwise direction.
B) POWER CORD RELEASE / STORAGE
Upper cord hook
Lower | Cord clip |
cord hook |
|
1)Turn the upper cord hook to the upright position
and wind the power cord around the upper and lower cord hooks.
1)To release the power cord, turn the upper hook. Then set the power cord into the cord clip to help secure it during use.
NOTE: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet in only one way. If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
To avoid any possible damage to the power cord, never run over the cord or allow it to become caught in the beater bar.
– 4 –
