Preparing for use
Fitting the standard floorhead
Push the suction tube into the floorhead and turn it clockwise or
To release the floorhead from the suction tube, press the locking button (see arrow) and pull the suction tube away from the floorhead.
The floorhead can be used for all normal cleaning of carpets and rugs. It can also be used with the brush protruding to vacuum hard flooring. For hard flooring, such as stone and parquet, we recommend using one of the special Miele floor brushes (see "Optional extras").
It is also important to observe the flooring manufacturer’s cleaning and care instructions.
Vacuum carpets and rugs with the brush retracted:
Press the foot switch .
Clean hard flooring which is not susceptible to scratching with the brush protruding:
Press the foot switch .
The Classic Allergotec floorhead, the ACCU NOVA floorhead and the Turbobrush
Some models may be supplied as stan- dard with one of these accessories (see "Optional accessories"). Please refer to the separate operating instructions supplied with these brushes for instructions on use and maintenance.
12
