Miele S4212 manual Models with radio controls

Use

Models with radio controls

Certain models have controls on the handle which transmit radio signals to the vacuum cleaner. The stand-by indicator on the vacuum cleaner will light up when the vacuum cleaner is ready to use.

To pause the appliance during operation:

￿Press the stand-by button on the handle.

Warning: The stand-by button is designed to pause the vacuum cleaner for short periods of time whilst vacuuming. After vacuuming the device has to be switched off and unplugged from the mains supply.

An LED will indicate each time a button is pressed on the handle.

At the end of the pause you can do one of the following:

￿Press the stand-by button again to switch the vacuum cleaner back on at the setting you were using before pausing it.

￿Press the + button to switch the vacuum cleaner back on using the highest power setting.

￿Press the - button to switch the vacuum cleaner back on using the lowest power setting.

16