Maintenance and care
Dust compartment filter (for motor protection)
^ Open the dust compartment lid.
^ Unclip the filter frame, remove the old filter and replace with a new one.
^ Close the filter frame.
Changing the thread lifters
The thread lifters on the suction inlet to the floorhead and upholstery nozzle can be replaced.
Check them from time to time and replace them if the pile has worn down.
^ Use a knife or similar object to remove them from the slots.
^ Fit the new thread lifters.
If thread or hair has wound around the bearing on the floorhead roller
a Release the bearing (with bayonet fitting) using a coin.
b Press the bearing out, and remove.
c Take out the roller.
Remove any threads and hair, replace the roller and refit the bearing.
Replacement parts are available from your Miele dealer or from the Miele Spare Parts Department (see back cover for contact details).
25 |
