Operation
Models with radio frequency controls
The operating state is shown by the
Standby indicator on the vacuum.
The vacuum can be switched to a standby mode during pauses.
Press the Standby button on the handpiece.
To turn the vacuum on again:
Press the Standby button on the handpiece. The vacuum cleaner turns on to the last selected power level.
Press – to turn the vacuum cleaner on at the lowest power level.
Press + to turn the vacuum cleaner on at the highest power level.
Every push of a button on the radio handpiece is displayed by the indicator light.
The vacuum can still be used if the battery in the radio handpiece is weak or not inserted at all.
Turn the vacuum on with the foot switch.
Press the Reset button.
The vacuum will operate continuously on the maximum suction power.
Turn the vacuum off with the foot switch.
Only use the Standby mode for short pauses during vacuuming. Do not leave the vacuum in Standby mode, there is a danger of overheating and damage.
17
