Maintenance and care
Replacing the "ActiveAirClean" filter and the "Active HEPA" filter
Open the dust compartment lid.
Do not use more than one filter at a time.
Remove the exhaust filter.
Insert the new filter.
If you wish to replace the ActiveAirClean filter or the Active Hepa filter with an Air Clean filter see "Maintenance and care - Exchanging exhaust filters".
Close the dust compartment lid firmly until it clicks into place.
Resetting the filter change indicator
The filter change indicator (Reset button) must be reset each time the filter is replaced. To do this, the vacuum cleaner must be plugged in.
Press and hold the filter change indicator light until it goes out.
The display is now reset.
28
