Maintenance and care
Replacing the "Active Air
Clean" filter and the "Active
HEPA" filter
^ Open the dust compartment lid. ^ Lift and remove the filter.
^ Insert a new filter and press it downwards.
^ Close the dust compartment lid firmly until it clicks into place.
Resetting the filter change indicator
The filter change indicator (Reset button) must be reset each time the filter is replaced. To do this, the vacuum cleaner must be plugged in.
^Press and hold the filter change
indicator light until it goes out.
The display is now reset.
The indicator is only reset if pressed while lit. If the indicator is pressed while not lit, it will not be reset.
29
