Maintenance and care
If there are large particles or other blockages at the base of the suction hose, you can open it up to clear the passage.
Click the vacuum cleaner into the full upright position.
Press the release button on the telescopic wand and remove the handle from the suction hose
Guide the swivel elbow at the end of the suction hose over the catch hooks, to increase the stability the vacuum cleaner.
Undo the suction hose in the direction of the arrow.
Pull the suction hose connector off the swivel elbow.
Remove all blockages
Put the connector back on and click it shut.
If you still have not been able to remove the obstruction(s), there is another method you can try.
Open the service flap on the bottom rear of the vacuum cleaner.
Use a coin to undo the two screws until they stop.
Pry the service flap free.
Remove all blockages.
Put the service flap back on and screw into place.
31 |
