en
The illustrations referred to in the text are shown on the
Before using the vacuum cleaner
Attaching the suction hose (see fig. 1)
Insert the elbow into the suction socket until it clicks into place.
Disconnecting the hose (see fig. 2)
Press the release buttons on the sides of the elbow and lift the hose from the socket.
Connecting the suction hose and handpiece (see fig. 3)
Depending on the model, the hand- piece is already
Insert the hose into the handpiece until it clicks into place.
Connecting the telescopic wand and handpiece (see fig. 4)
Insert the handpiece into the telescopic wand until it clicks into place. Use the inlet guides of both parts to direct insertion.
To separate the parts from each other, press the wand release button and pull the handpiece away from the telescopic wand with a slight rotation.
Adjusting the two-piece telescopic wand (see fig. 5)
This telescopic wand is composed of two interlocking tube sections that can be adjusted to the desired length.
Press the adjustment button and slide the tubes to the desired length.
Attaching the standard floor brush (see fig. 6)
Observe the cleaning instructions of the floor manufacturer.
Place the floor brush on the telescopic wand and twist back and forth until it clicks into place.
To remove the floor brush from the telescopic wand, press the release button.
The floor brush is intended for everyday use on carpets, rugs, and hard flooring that is not susceptible to scratching.
For other floor coverings, we recom- mend using the special Miele brushes (see the section on "Optional accesso- ries").
Adjusting the floor brush (see fig. 7 + 8)
Observe the cleaning instructions of the floor manufacturer.
To clean carpets and rugs, lower the bristles by
pressing the foot switch marked with a .
To clean hard flooring, raise the tool by
pressing the foot switch marked with a .
10