Select the dryness level, At the end of a program | Miele T 1405

Quick Guide

4. Select the dryness level

^Press the selection button until the desired indicator illuminates.

5.Select the buzzer (if desired)

6.Start the program

^Press the "Start/Stop T" button.

7. At the end of a program

The "Anti-crease / End" indicator will light.

^Press "Door" and remove the laundry.

^Clean the lint filter.

^Press the "On/Off" button to turn off the dryer.

Image 21

Miele T 1405, T1405 Select the dryness level, Select the buzzer if desired Start the program, At the end of a program

Contents

Operating Instructions Vented Dryer 1405 Table of Contents This dryer is intended for residential use only Important Safety Instructions Important Safety Instructions Control panel Program recommendations Before loading the dryer Using the dryer Turn on the dryer and load the laundrySelect a program Extra Dry Program When to use Turbo Select a drying option if neededFull load Gentle Adjusting the buzzer volume Select the dryness levelSelect the buzzer if desired At the end of a program Start the program Adding or removing laundry during a program Canceling or changing a program Child lock Child lockTo activate the child lock To deactivate the child lock Dryer care Cleaning the lint filter Cleaning the drum Cleaning the exterior and the control panel Changing the light bulb What if the dryer will not run? What if the Filter/Vent fault indicator is lit?How do I prevent static cling? What if the drum light does not come on? What if the program runs too long or stops? Frequently asked questionsWhat if the laundry is not dry enough? What if water has collected around the drum opening? Quick Guide Turn on the dryer and load the laundry Quick GuideSelect a program Select a drying option if needed Select the dryness level Select the buzzer if desired Start the programAt the end of a program For uniform loads, e.g. sheets Underwear, socks PC Update Technical ServicePage Installation Instructions Important Safety Instructions Caring for the environment Disposal of the packing materialsDisposal of an appliance Washer / Dryer Stack Height of vent adapter in a stacked installation Electrical connection Easy Installation KIT Installation Leveling the dryer InstallationDetermining the position of the exhaust connection Changing the position of the exhaust connection Installation tips Wall connection with rigid pipe Window connection Dryer top view Direct wall connection Tips about the ductwork How to calculate the effective duct length Elbow 90 sharp Smooth metal ductConcertina bend Wall vent or window vent Total duct length Page Page All rights reserved