Miele T 1520 Changing the decor panel, Fitting a toekick panel, Decor panel dimensions

INSTALLATION INSTRUCTIONS

Changing the decor panel

Note: The door should be closed when installing the decor panel.

^On the door lock side remove the

4 screws (3 on the side and 1 under- neath) and the door strip.

^Loosen the remaining 7 screws on the lower and side decor strips until the decor panel can be bowed slightly and taken out.

^Insert the new panel.

^Reassemble in the reverse order and tighten the screws.

Decor panel dimensions

Width:	23 11/16
Height:	23 1/8
Thickness:	1/16

Panels between 1/16 and 1/8 thick require an adapter strip available from the Technical Service Department.

Fitting a toekick panel

The appliance toekick below the door can be concealed using a toekick panel.

The height and depth of the appliance toekick cannot be altered.

A cut-out must be made in the toekick panel around the ventilation slots. If the ventilation slots are blocked the machine will not dry efficiently.

22