Frequently asked questions
With the following guide, minor problems can be fixed without a service call.
What if | Possible fault | Fix | |
|
|
| |
. . . the tumble | Check whether the "On" | Repeat the program selection | |
dryer fails to start | indicator lights up. If so, | procedure in the correct | |
when turned on? | failure to start may be due | sequence, see "Using the | |
| to an incorrect program | dryer". | |
| selection procedure. |
| |
|
|
| |
| If the "On" indicator lamp | – The "ON/OFF" button is | |
| does not illuminate, check | pressed in. | |
| that: | – The door is properly closed. | |
|
| – The machine is plugged in | |
|
| and the fuse or circuit | |
|
| breaker has not tripped. | |
|
|
| |
. . . the laundry is | The load consisted of | Select a longer drying | |
not dry enough? | dissimilar items (size and | program. | |
| fabrics). |
| |
|
|
| |
| Small loads or individual | Use a timed drying program. | |
| items may cause the |
| |
| program to terminate |
| |
| prematurely. |
| |
|
|
| |
| The load was too large for | Press the "Load size - Full" | |
| the "Load size - Half" | button when drying larger | |
| position. | loads. | |
|
|
| |
. . . the drying | The lint filter is clogged. | Clean the lint filter in the door. | |
times are too |
|
| |
The laundry was not spun | Make sure that the laundry is | ||
long? | |||
in the washer for a | thoroughly spun before drying. | ||
| |||
| sufficient time. |
| |
|
|
|
17
