Dryer care

Changing the light bulb

,WARNING

To reduce the risk of electric shock, disconnect this appliance from the power supply by unplugging or tripping the circuit breaker.

^Unscrew the plastic bulb cover located inside the drum and above the door (see illustration.)

^Replace the light bulb with a temperature proof bulb (part # 02 150 900) available from Miele’s Technical Service Department.

The light bulb must not exceed the maximum wattage quoted on the data plate.

^Refit the plastic bulb cover.

Take care that the bulb cover is tightened into place. Otherwise moisture may penetrate the socket and cause a short circuit.

Power failure - Emergency door release

^Pull forward on the unhinged side of the door.

16

Page 16
Image 16
Miele T 1576 operating instructions Changing the light bulb, Power failure Emergency door release