Miele T 8012 C, T 8013 C installation instructions Connector

Installation

1 Connector

2Sink connecting nut

3Hose clamp

4Hose end

5Non-return valve

6Dryer drain hose

^Install the connector 1 with the sink connecting nut 2 to the sink standpipe.

Usually the sink connection nut is equipped with a washer. Please remove the washer.

^Plug the hose end 4 to the connector 1.

^Using a screwdriver tighten the hose clamp 3 directly behind the sink connecting nut.

,Install the non-return valve 5 vertical or slightly angled. If installed horizontal it will not operate correctly.

^Connect the non-return valve 5 to the dryer drain hose 6. See illustration for the correct direction.

^Fasten the non-return valve with the hose clamps.

35