Installation
External water drain
When drying is in progress, condensed water is pumped into the condensed water container through the drain hose at the back of the dryer. The condensed water can also be drained directly if the machine is installed near a sink or a standpipe so that the condensed water container does not have to be emptied.
Drain hose length . . . . . . . 4' 11" (1.5 m)
Maximum delivery
head . . . . . . . . . . . . . . . . . 4' 11" (1.5 m)
Maximum drain length. . . . . . 13 ft (4 m)
If the hose is not long enough, an extension hose is available as an optional accessory from the Miele.
^Pull the drain hose off the holder.
^Drain remaining water in the container.
^Unwind the hose from the holder and carefully pull it from the clamps.
Installing the drain hose
Do not pull or kink the drain hose, it may be damaged!
^ The drain hose holds a small amount of remaining water. Keep a container at hand.
^ Guide the hose depending on the installation to the left or right.
^ Leave the hose in the middle clamp to prevent the drain hose from becoming kinked.
32
