Frequently asked questions
The laundry is not dry enough.
Possible fault | Solution |
The load contained too many | – Continue drying using the "Warm air" |
dissimilar items (size and fabrics.) | program. |
| – Select a suitable program. |
The laundry is still wet. The program runs too long. | |
The air flow is insufficient. | Check the lint filter, air intake and vent for |
| obstructions. |
The drum light does not come on. |
|
The light turns off automatically | Close and open the door, the light should |
(energy saving). | come on. |
The bulb may be bad or burned | Change the light bulb. |
out. | See "Dryer Care". |
The program runs too long or stops.
Important: To fix the following problems, open and close the dryer door.
The air supply is insufficient. | Open a window or door to increase air flow. |
The lint filter is clogged with lint. | Clean the lint filter. |
The exhaust hose or the | – Check the exhaust parts (e.g. wall vent |
connection is clogged with lint. | duct, louvered wall vent, bends, etc.) |
| regularly for air permeability. |
| – Remove the lint. |
The laundry was not spun | Spin laundry thoroughly before drying. |
sufficiently in the washer. |
|
The dryer is over loaded. | Regard the maximum load size per |
| program. |
Metallic zippers prevent a correct | – Open the zippers of the laundry before |
measurement of the laundry’s | drying. |
residual moisture. | If the problem persists, dry items with long |
| zippers using the "45 min. warm" program, |
| if necessary use the laundry basket. |
20
