Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and
proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is
delivered.
^Using the spanner supplied turn
counter nut 2in a clockwise
direction. Then turn counter nut 2
together with foot 1to unscrew.
^Use a spirit level to check the
machine is standing level.
^Hold foot 1securely with a pipe
wrench. Turn counter nut 2again
using the spanner supplied until it
sits firmly up against the housing.
,All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise
there is the danger of the machine
moving about.
Installation and connection
46