Installation and connection

￿To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed.

￿Fit the covers onto the two holes. Then plug the holes as shown with the caps.

￿Secure the transit bars to the back of the washing machine. Make sure that holes ￿ are fitted over retainers ￿.

￿The machine must not be moved without the transit bars in place. Store them as shown or keep them in a safe place for future use. They must be re-fitted if the machine is to be moved again (e.g. when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the procedure.

46

Page 46
Image 46
Miele W 1613 operating instructions Re-fitting the transit bars