Problem solving guide
The „Pre-wash“ indicator flashes
^Start the program again.
If the indicator still flashes, call the Miele Technical Service Department.
The „Main wash“ indicator flashes during, or after the end of a program
If this occurs again during the next pro- gram,call the Miele Service Depart- ment.
Despite adequate water supply pressure, the machine takes a long time to fill
Clean the filters in the water inlet sys- tem (see „Cleaning and Care“).
Large amounts of unused de- tergent remain in the dis- penser drawer
The water supply pressure is too low.
^Clean the filters (see „Cleaning and Care“).
^Select the „Water plus“ function if necessary.
^If using a water softener, pour the de- tergent into the dispenser before adding the water softener.
Fabric softener is not com- pletely dispensed or water re- mains in the p compartment
The dispenser drawer was opened while the fabric softener was being flushed in, or
The siphon tube is incorrectly posi- tioned or clogged. Clean it (see „Cleaning and Care“).
25
