Technical data | Miele W 1903 manual

Technical data

1.2Specifications

Cold water hose with 3/4” female hose thread connection

Drainage is via a 5 ft. long (1.5m) , 1 1/4 “ (32mm) OD hose.

This washing machine is supplied with a 5 foot long (1.5m) cable with plug for connection to a 120/240 V (208 V) 60 Hz (3-pole-4 wire grounding) power supply.

Power consumption: (Normal cycles)

“COTTONS” without prewash	190°F	1.1 kWh
Water consumption:
“COTTONS” without prewash	17 US gallons (65 l)
Program duration:
“COTTONS” without prewash	190°F	approx. 115 minutes
Spin speed:
Detergent dispenser:
Automatic for:	Prewash
	Mainwash
	Fabric softener or starch
Temperature control:	variable from cold to 190°F

40

Image 40

Miele W 1903 operating instructions Technical data

Contents

Operating instructions for the W 1903 Washing Machine Contents Guide to the machine Detergent dispenser drawer Important safety instructions Before using the first time Help protect our environmentDisposal of the packing material Disposal of your old appliance Optimal usage Economy Before using the first time Water hardness reminder Before washing Preparing the LaundryPrepare the wash load To start a program Press the Door button to open the door Load the machineRecommended load sizes are noted below Close the machine door After washing End of ProgramClose the drum door Washing C Textile care symbolsIroning Adding detergent Adding fabric softener or starch Using the Starch program to dis- pense liquid starchStarch Programs Cottons Fine / Delicates Spin Drain Additional options Changing the program sequence Cleaning and care To clean the washing machineCleaning the detergent drawer Pull the drawer out until it stops Cleaning the drain pump and lint trap Cleaning and care To clean the filter in the inlet hose Cleaning the water inlet filtersTo clean the filter in the inlet valve Problem solving guide On indicator does not lightSelected program does not begin Check q warning lamp flashes „Pre-wash indicator flashes Laundry washed with liquid detergent is not clean Excessive build-up of foamLime deposits are visible on the surface of the drum Pilling on fabrics Machine shakes during the spin cycle Opening the drum door during a power failureLaundry is too wet or the machine does not spin at all After sales service Installation Installation surfaceRemoving the shipping struts Installation Instructions Adjust the four leveling feet as fol- lows Leveling the machine Washer / Dryer Stack Plumbing Connection to the drain sys- tem Electrical connection Grounding Instructions Program Lock Child safety feature Programmable functionsHigh water level only in Cottons rinses 5th Rinse in the Cottons program To activate the additional functions Step Step Additional function Deleting the additional func- tions Technical data Dimensions Technical data Page Page