INSTALLATION INSTRUCTIONS
Any residual water left in the machine from the factory test- ing process can be flushed out as follows:
Do not put any laundry in the ma- chine.
Add a small amount of detergent to compartment j.
Turn on the machine.
Press the “Rapid wash” button.
Turn the programme selector to the “COTTONS 60°C” programme.
Any residual water will be flushed out during the programme.
Water hardness reminder
The amount of detergent needed to wash clothes depends on various fac- tors, including the water hardness in your area. You can set the water hard- ness dial in the detergent dispenser as a reminder.
Turn the dial to the desired setting. Use the tool supplied with the ma- chine. It is located behind the deter- gent drawer, on the left hand side (see Cleaning and Care) water.
1 = soft, 4 = very hard
41
