Standby display, Memory, Anti-crease, Off | Miele W 3740 manual

Programmable functions

Standby display

To save energy, the display goes out and the indicator light for the Start/Stop button will start flashing slowly.

The display will always go out,

–if a programme is not selected within 10 minutes of the machine being switched on.

–10 minutes after the end of a programme.

Pressing one of the buttons switches the display back on again.

You can also choose whether you want the display to go out 10 minutes after a programme has started or to remain visible throughout the programme.

On

The standby function is switched on. When this option is selected, the display will go out 10 minutes after a programme has started.

Not in current prog.

(the machine is delivered with this option selected)

The standby function is switched off. The display will remain visible during a programme.

Memory

The washing machine will store the most recently selected settings (programme, temperature, spin speed and any extra options) in memory once the programme has started.

These settings will appear in the display the next time the machine is switched on.

The machine is delivered with the memory function deactivated.

Anti-crease

Anti-crease helps prevent creasing if laundry is not normally removed immediately after the end of a programme.

The drum will turn at intervals for up to 30 minutes after the programme has finished.

The door can be opened and laundry removed at any time during the anti-crease phase.

On

(the machine is delivered with this option selected)

Anti-crease is activated.

Off

Anti-crease is deactivated.

60

Image 60

Miele W 3740 operating instructions Standby display, Memory, Anti-crease, Not in current prog, Off

Contents

Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Blocked drain outlet Technical data Safety with children Correct application Technical safety Correct use Accessories Operating the washing machine Control panel Programme duration Programmable functions Before using for the first time Setting the languageReminder to remove transit bars Running your first programme When drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption Detergent How to wash correctly Brief instructionsSort the laundry Switch on the washing machine Load the drum Select a temperature / spin speedSelect a programme Select an extra options ShortWater plus Pre-wash Add detergent Remove the laundry when the programme has finished Start the programme Spinning Final spin speedRinse and interim spin To omit the final spin Rinse hold Programme chart Cottons 30C to 95C Max. load 6.0 kgMinimum iron 30C to 60C Max. load 3.0 kg Delicates Cold to 60C Max. load 2.0 kg Silks Cold to 30C Max. load 1.0 kg Express Cold to 40C Max. load 3.0 kgAutomatic Cold to 40C Max. load 3.5 kg Shirts Cold to 60C Max. load 2.0 kg Outerwear Cold to 40C Max. load 2.0 kg Dark garments Cold to 40C Max. load 3.0 kgSpin Programme sequence Main wash Rinses Spinning Special features in the programme sequences Garment care label symbols Cancelling a programme Changing the programme sequenceInterrupting a programme Changing a programme Safety lock To activate the safety lockTo deactivate the safety lock Adding or removing laundry after a programme has started Detergent Correct detergentAll purpose Detergent for Coloured fabrics Delicates Whites Water softener Washing with several componentsRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyes Cleaning and care Cleaning the detergent dispenser drawerExtra cleaning External casing and fascia panel Cleaning the detergent dispenser drawer housing Descaling the machine Cleaning the water inlet filters To clean the filter in the water inlet valve Problem solving guide Programme does not start Fault messages in the display Problem Possible cause Remedy Lights upFlashes Flashes Lights up General problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Blocked drain outlet Opening the drum door After sales service Future updates PCAppliance guarantee Optional accessories Installation and connection Front view Rear view Installation surface Installing the washing machineRemoving the transit bars Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machine Replacing the lid Electronic unit and washing machine housing Miele water protection systemInlet hose Drain hose Maintenance and care Connection to the water supplyExtension hose Connection to the drainage system Drain hose connection Non-rewireable plugs BS Electrical connection U.K Consumption data Technical data Programmable functions For changing default settings Programmable functions Language F Water plus Gentle actionSuds cooling To use the washing machine when the code is activated CodeTo activate the code To enter the code Temperature unit BuzzerKeypad tone Brightness Standby display MemoryAnti-crease Not in current prog Optional accessories CareCollection UltraWhite detergent UltraColor detergent for coloured garmentsLiquid detergent For Delicates Fabric conditionerPage Alteration rights reserved/0309/W Nr 171 180