Miglia Technology TVMini 2 manual I. Connecting TVMini2, II. Installing The Tube

I.Connecting TVMini2

1.Connect TVMini2 to a free USB 2.0 port of your Mac.

2.Connect the mini-antenna to the antenna connector.

Note: The mini-antenna will only work in areas where DVB-T reception is good. You should not have any difficulties receiving the full range of TV stations if you live in Germany or northern European countries. In the UK and France, it is strongly recommended to place the antenna near a window, as ‘indoor mobility’ is not yet implemented.

If you do not receive any channels when using the mini-antenna, connect TVMini2 to a roof-top antenna. You cannot receive TV signals from CableTV or analogue signals with TVMini2.

II.Installing The Tube

1.Insert the The Tube CD-ROM in your CD/DVD Drive

2.Double-click on ‘Install The Tube’ to launch the installation programme.

3.Click “Continue” when the alert message informing you that the installation package contains a program that verifies if the software can be installed.

4.When asked, select the destination Hard Drive and Folder where you wish to install The Tube. The default selection made by the installer is recommended. Then click “Continue”

5.On the next screen, click “Install”. The installation program will then ask you for your administrator password. This is your normal Mac OS X password you created when you first used Mac OS X and not the software activation code.

TVMini2™ User Guide

Page 5