Milan Technology MIL-S24000T manual Features

to users on a local area network. A switch increases capacity and decreases network loading by making it possible for a local area network to be divided into different segments which do not compete with each other for network transmission capacity, giving a decreased load on each.

The switch acts as a high-speed selective bridge between the individual segments. The switch automatically forwards traffic that needs to go from one segment to another, without interfering with any other segments. This allows the total network capacity to be multiplied, while still maintaining the same network cabling and adapter cards.

Switching LAN technology is a marked improvement over the previous generation of network bridges, which were characterized by higher latencies. Routers have also been used to segment local area networks, but the cost of a router and the setup and maintenance required make routers relatively impractical. Today’s switches are an ideal solution to most kinds of local area network congestion problems.

Features

The MIL-S24000T Gigabit Ethernet Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of users increase continuously.

„24 1000BASE-T Gigabit Ethernet ports

„Auto-Negotiation for 10/100/1000Mbps and duplex mode

„Auto-MDI/MDIX for each port

„Full/Half duplex transfer mode for 10 and 100Mbps

„Full duplex transfer mode for 1000Mbps

„Store-and-Forward switching method

„IEEE 802.3x flow control for full-duplex mode

„Backpressure flow control for half-duplex mode

„Integrated address Look-Up Engine, supports 8K absolute MAC addresses

„Supports 400K Bytes data buffer per device

„Extensive front-panel diagnostic LEDs

2