Storage
The Arrow 40/55 Fluid Head can be stored for extended periods; Miller recommends storage in a Miller Soft Case and the following:
◗Remove battery.
◗Clean the external surfaces.
◗Keep in a dry place away from direct sunlight.
◗Loosen off PAN & TILT LOCK.
Spare Parts and Accessories
ITEM | ITEM NO. |
|
|
Battery | P3798 |
Camera plate Assembly (Including 3/8” + 1/4” screws) | # 860 |
|
|
Camera screw 3/8” | P0037 |
|
|
Camera screw 1/4” | P0036 |
Telescopic Pan Handle assembly (incl. Handle Clamp) # 694
Standard Pan Handle | # 692 |
|
|
Soft Case | # 870 |
|
|
Soft Case | # 872 |
|
|
Clamp nut | P3836 |
|
|
Service, Sales and Support
Miller Authorised Service Agents must carry out all service and repair work. Failure to observe this requirement may void warranty. It is advisable to notify Miller or a Miller Authorised. Service Agent if a change of performance is observed as a result of dropping or rough usage. For information regarding sales and service of Miller products or for your nearest Miller representative please contact us via our website or at the following:
MILLER CAMERA SUPPORT EQUIPMENT
30 Hotham Parade, Artarmon, Sydney, NSW 2064 Australia Tel: +61 2 9439 6377 Fax: +61 2 9438 2819
Email: sales@miller.com.au
MILLER Camera Support (LLC) USA
218 Little Falls Road, Cedar Grove, New Jersey
Tel: (973) 857 8300 Fax: (973) 857 8188
Email: sales@millertripods.us
MILLER FLUID HEADS (EUROPE) LTD. Unit A2, Ford Lane Industrial Estate
Ford Lane, Ford, West Sussex BN18 0DF, United Kingdom Tel: +44 (0)1243 555255 Fax: +44 (0)1243 555 001 Email:
Warranty
Please refer to warranty card for complete details. | Website - www.millertripods.com |
|
10
