Miller Electric 22A, 24A manual Pin Plug Information, Connecting Welding Gun And Weld Cable

3-6.	14-Pin Plug Information
				Pin*	Pin Information
				A	24 volts ac with respect to pin G.
	J		A	B	Contact closure to A completes 24 volts ac contactor control circuit.
		K		G	Circuit common for 24 volts AC circuit.
	I		B
H	N	L	C	C	+10 volts dc output to remote control with respect to pin D.
	G	M	D	D	Remote control circuit common.
		F	E	E	0 to +10 volts dc input command signal from remote control with respect to pin D.
				F	Current feedback; 0 to 10 volts dc, 1 V/100 A
				H	Voltage feedback; 0 to 10 volts dc, 1 V/10 arc volts
*The remaining pins are not used.					Ref. S-0004-A

3-7. Connecting Welding Gun And Weld Cable

1

2 3

1Gun Securing Knob

2Gun Block

3Gun Outlet Wire Guide

Loosen knob, insert gun into block. Position outlet wire guide as close as possible to drive rolls without touching. Tighten knob.

4Gun Trigger Plug

5Gun Trigger Receptacle

6Weld Cable Terminal

7Weld Cable From Welding Power Source

5 4

7

6

Tools Needed:

9/16, 5/8 in

Ref. 802 356

OM-193 472 Page 11