Miller Electric Big 40 Diesel manual Stick Smaw Welding, Plasma Cutting, TIG Gtaw Welding

Genuine Miller Accessories

FA-1D Lockable Flame Arrestor Fuel Cap #043 947 Field Fuel cap can be padlocked to prevent vandalism. A built-in flame arrestor prevents flames or sparks from entering the fuel tank.

Spark Arrestor Muffler Kit #195 012 Field Prevents particles

from leaving the muffler that could potentially start a fire. Mandatory when operating on California grasslands, brush, or forest-covered land, and in all National Forests. For other areas, check your state and local laws. Meets US Forest Service standard 5100-1B.

Vandalism Lockout Kit #195 118 Field Lockable hinged steel panels cover and protect name plate gauges and ignition switch (padlock included). Also includes engine compartment door lock and key.

Cable Holder #043 946

(Continued)

Stick (SMAW) Welding

Weld Leads

#173 851 2/0, 350 A, 100% duty cycle, 50 ft stinger, 50 ft work cable #043 952 2/0, 300 A, 100% duty cycle,

100 ft stinger, 50 ft work cable

Plasma Cutting

Spectrum® 375 X-TREME™#907 303 Spectrum® 375 X-TREME™with X-CASE™#907 339 (not shown)

See Lit. Index No. PC/9.2.

Spectrum® 625	#907 058
See Lit. Index No. PC/9.5.
Spectrum 2050	#903 777-01-2

See Lit. Index No. PC/7.0.

MIG (GMAW) or Flux Cored (FCAW)

Millermatic®

SuitCase™ 8RC Wire Feeder	#194 938
SuitCase™ 12RC Wire Feeder	#194 940

Lightweight and flexible enough to run a variety of wires up to .062 in diameter. Comes standard with remote voltage control. See Lit. Index No. M/6.5.

MIG (GMAW)/Flux Cored (FCAW) Guns Miller produces a complete line of dependable MIG guns. See Lit. Index Nos. AY/15.0, AY/16.0 and AY/17.0.

Spoolmatic® 30A

Spool Gun #130 831

Air-cooled, 200-amp, 1-lb spool gun for

aluminum MIG. See Lit. Index No. M/1.73.

WC-24 Control #137 549

Use with Spoolmatic 30A.

Saddle-bag-style cable holder. Convenient wrap- around storage of coiled cable for transportation. Stores 100 ft of 2/0 cable on each side.

Note: For best results do not weld when cable is coiled! Canvas cover cannot be used with cable holder.

Roll Cage/Drip Pan #194 918 Field Heavy-duty galvanized steel structure designed to protect the machine. The roll cage meets offshore oil

platform requirements with a drip pan and drain plug along with a heavy-duty lift eye.

Canvas Cover (Blue) #194 683 Field Attractive, waterproof canvas cover resists stains and mildew, and protects the finish of your welder.

Passport® Plus #907 401 Portable, all-in-one MIG package features ultimate arc performance, self-contained gas

bottle, and flexibility to plug into 115 or 230 V power with Miller exclusive Multi-Voltage Plug. See Lit. Index No. DC/12.53.

SuitCase™ X-TREME™8VS Wire Feeder #300 093

SuitCase™ X-TREME™12VS Wire Feeder #195 500

Lightweight, voltage-sensing wire feeders include secondary contactor and gas valve. Require drive roll kit. See Lit. Index No. M/6.41.

XR™ Wire Feeders and Guns Push-pull system designed to handle difficult-to-feed soft alloy wires such as aluminum. See Lit. Index No. M/1.7, M/1.71, and M/1.73.

TIG (GTAW) Welding

Dynasty® 200 Series

For premium portable

AC/DC TIG arc quality.

See Lit. Index No.

AD/4.8.

HF-251 Series #042 388 HF-251D-1, 115 VAC

#042 387 HF-251D-2, 230 VAC High-frequency arc starter and stabilizer.

See Accessory Lit. Index No. AY/5.0.

Note: Canvas cover cannot be used with cable holder.

5