IBM XSERIES 220 manual Error Code/Symptom FRU/Action 00019701, 00019702, Run Configuration/Setup

Error Code/Symptom			FRU/Action
00019701	(Microprocessor	1.	Microprocessor 1
1 failed BIST)		2.	System Board
00019702	(Microprocessor 2	1.	Microprocessor 2
failed BIST)		2.	System Board
00180100		1.	Run Configuration/Setup
(No room for PCI option		2.	Failing Adapter
ROM)
		3.	System Board
00180200		1.	Run Configuration/Setup
(No more I/O space available		2.	Failing Adapter
for PCI adapter)
		3.	System Board
00180300		1.	Run Configuration/Setup
(No more memory (above		2.	Failing Adapter
1MB for PCI adapter)
		3.	System Board
00180400		1.	Run Configuration/Setup
(No more memory (below		2.	Failing Adapter
1MB for PCI adapter)
		3.	System Board
00180500		1.	Remove Failing PCI Card
(PCI option ROM checksum		2.	System Board
error)
00180600		1.	Run Configuration/Setup
(PCI device built-in self test		2.	Failing Adapter
failure)
		3.	System Board
00180700 (xxxxyyyy planar		1.	System Board
PCI device not responding		2.	PCI Card
(where xxxx is PCI vendor ID
and yyyy is PCI device ID)
00180800(Unsupported PCI		1.	System Board
device installed)		2.	PCI Card
00181000	(PCI error)	1.	System Board
		2.	PCI Card
01295085	(ECC	1.	System Board
checking hardware test error)		2.	Microprocessor
01298001	(No	1.	Ensure all microprocessors are the same stepping level and cache size.
update data for		2.	Microprocessor 1
microprocessor 1)
01298002	(No	1.	Ensure all microprocessors are the same stepping level and cache size.
update data for		2.	Microprocessor 2
microprocessor 2)
01298101	(Bad	1.	Ensure all microprocessors are the same stepping level and cache size.
update data for		2.	Microprocessor 1
microprocessor 1)
01298102	(Bad	1.	Ensure all microprocessors are the same stepping level and cache size.
update data for		2.	Microprocessor 2
microprocessor 2)

Symptom-to-FRU index 123