IBM XSERIES 220 manual Error symptoms

Error Code/Symptom				FRU/Action
217-XXX-001		(Failed BIOS	1.	Fixed Disk 2
Fixed Disk test)
Note:	If RAID is
	configured, the fixed
	disk number refers to
	the RAID logical
	array.
217-XXX-002		(Failed BIOS	1.	Fixed Disk 3
Fixed Disk test)
Note:	If RAID is
	configured, the fixed
	disk number refers to
	the RAID logical
	array.
264-XXX-0NN		(NN	1.	Tape Cartridge, if user executed the Read/Write Tape Drive test (XXX = 256)
= SCSI ID of failing Tape			2.	SCSI or power cable connected to the tape drive with SCSI ID NN
Drive)
			3.	Tape drive with SCSI ID NN – refer to Help and Service Information appendix of
				tape drive’s User Guide.
			4.	I/O Legacy Board or SCSI Controller – run SCSI Controller diagnostic to
				determine of SCSI bus is functioning properly.
264-XXX-999		(Errors on	1.	See error messages/text in the PC Doctor error log for detailed information on
multiple tape drives, see error				each individual tape drive error.
text for more info)
301-XXX-000		(Failed	1.	Keyboard
Keyboard test)
405-XXX-000		(Failed	1.	Verify that Ethernet is not disabled in BIOS.
Ethernet test on controller on			2.	System Board
the System Board)
405-XXX-00N (Failed			1.	Adapter in PCI slot N.
Ethernet test on adapter in			2.	System Board
PCI slot N)
415-XXX-000		(Failed	1.	Cable
Modem test)			2.	Modem
			3.	System Board
Error symptoms
	General			FRU/Action
CD is not working properly.			1.	Clean the CD.
			2. Run CD-ROM diagnostics.
			3. CD-ROM Drive
CD-ROM drive tray is not			1.	Insert the end of a paper clip into the manual tray-release opening.
working.			2. Run CD-ROM diagnostics.
(The server must be
			3.	CD-ROM Drive
powered-on.)

Symptom-to-FRU index 117