Solving common dispenser problems
PROBLEM CAUSE
Ice dispenser l Freezer door open
won’t work l Ice bin not properly installed
l Wrong ice in bin
l Dispenser not used for extended periods, causing ice cubes to melt together
Ice dispenser l Ice dispenser bar
stops working held in too long
SOLUTIONS
l Close the freezer door.
l Make sure bin is pushed in all the way.
l Use only crescents from ice maker.
Shake the bin occasionally to keep cubes separated and to obtain increased storage
CapAt)‘.
lDump old ice and make a new supply.
l Wait about 3 minutes for the dispenser motor to reset.
l Large amounts of ice should be taken from the bin, not through the dispenser.
Removing | the | base grille |
To remove the grille: |
| |
1. Open refrigerator | door. | Condenser |
2.Pull base grille forward to release the support tabs from the metal clips.
3.Do not remove Tech Sheet fastened behind the grille.
To replace the grille:
1.Line up grille support tabs with metal clips.
2.Push firmly to snap into place.
3.Close refrigerator door.
See cleaning instructions for defrost pan and condenser coils on page 22.
18