Adjusting the lateral-adjust
To slide shelf side-to-side:
1.Lii slightly on shelf front.
2.Slide to desired location.
3.Lower shelf front to level position.
NOTE: You do not have to remove small items from the sheff before moving it
To remove the shelf:
1.Remove all items from the shelf.
2.Hold back of shelf with one hand.
3.Lii front of shelf to 45” angle.
4.Lower shelf slightly to release shelf from upper channel of track. Then pull shelf straight out.
NOTE: Shelf is heavy. Make sure you use both hands when removing shelf.
shelf
Lift front slightly. ’ ”
Then slide to new location.
Upper channel
HoM with both hands and lift front to 45” angle.
To remove shelf track:
1.Lii both sides of track slightly.
2.Pull track straight out.
To replace shelf track:
1.Guide track hooks into the shelf support slots on the back wall of the cabinet. NOTE: Make sure all three track hooks are in slots and that the slots are parallel to each other.
2.Push track backward and down.
3.Check that track is completely seated in the sheff supports.
| Hold both sides and lift up and out. ’ “ | |
Make |
| |
sure | all 3 | !‘Shelf |
sets | of | support |
hooks |
| |
are | in |
|
support |
| |
slots. |
| |
10
