Note: If you removed the support bracket assembly after you removed the cover, reinstall it before you install the cover.
To install the server
1.Clear any cables that might impede the replacement of the cover.
2.Align the bottom tabs of the side cover with the matching slots in the server chassis; then, insert the tabs into the slots.
3.Close the
4.Make sure that the stabilizing feet are rotated outward so that they properly support the server.
5.Reconnect the external cables and cords to the server; then, plug the power cords into electrical outlets.
Connecting external options
You can attach a SCSI storage expansion enclosure to the server if you install an optional SCSI adapter in one of the five PCI adapter slots on the system board.
Installation procedure
To attach an external device, do the following:
