Starting the Configuration/Setup Utility program
To start the Configuration/Setup Utility program, do the following:
1.Turn on the server and watch the monitor screen.
2.When the message Press F1 for Configuration/Setup appears, press F1.
Notes:
a.You can set an administrator password through the Configuration/Setup Utility program only if the optional system management adapter is installed in your server.
b.If you have set both levels of passwords (user and administrator), you must type the administrator password to access the full Configuration/Setup Utility menu.
3.Follow the instructions that appear on the screen.
Choices available from the Configuration/Setup main menu
From the Configuration/Setup Utility main menu, you can select settings that you want to change. The Configuration/Setup Utility main menu is similar to the following:
IBM - © IBM Corporation 2000
Configuration/Setup Utility
•System Summary
•System Information
•Devices and I/O Ports
•Date and Time
•System Security
•Start Options
•Advanced Setup
•Error Logs
Save Settings Restore Settings Load Default Settings
Exit Setup
<F1> Help | < ↑ > <↓ > Move |
<Esc> Exit | <Enter> Select |
Notes:
1.You can press F1 to display help information for a selected menu item.
2.The choices on some menus might differ slightly from the ones that are described in this book, depending on the BIOS version in the server.
Descriptions of the choices that are available from the main menu are as follows:
•System Summary
Select this choice to display configuration information. This includes the type and speed of the microprocessors and the amount of memory that is installed.
