Ethernet teaming messages, Event ID Type Description

Error code		Description
(hex)


0x0F	Explanation: Could not allocate enough memory for other structures.
	Action:
	1.	From the Windows NT desktop, select Start -> Control Panel ->
		Networks -> Adapters.
	2.	Select your IBM Ethernet adapter from the list.
	3.	Select Properties -> Advanced.
	4.	Lower the value for the resource named in the message.

0x10	Explanation: Did not find any Ethernet controllers.
	Action: Using the Configuration/Setup Utility, make sure that Ethernet is
	enabled.

0x11	Explanation: Multiple Ethernet controllers found, but none matched the
	required ID.
	Action: Using the Configuration/Setup Utility, make sure that Ethernet is
	enabled.

0x13	Explanation: Did not find any Ethernet controllers that matched the required
	subven/subdev.
	Action: Using the Configuration/Setup Utility, make sure that Ethernet is
	enabled.

0x16	Explanation: Single adapter found but multiple instances tried to load.
	Action: Using the Configuration/Setup Utility, make sure that Ethernet is
	enabled, and that the slot containing the IBM 10/100 Ethernet Adapter or the
	IBM 10/100 EtherJet™ PCI adapter is enabled.

0x17	Explanation: Slot parameter not specified in the registry.
	Action: Remove the adapter driver and reinstall it. If the problem persists,
	call for service.

All other 4-	Action: Call for service.
character
hexadecimal
codes

Table 5. NDIS (Windows NT or Windows 2000) driver messages for the Ethernet controller.

Ethernet teaming messages:

Event ID	Type	Description

01	Error	Explanation: Team Name and physical adapter name are
		the same. This is an invalid configuration.
		Action: Reconfigure the adapter team by double-clicking
		the PROSet icon in the control panel.

02	Error	Explanation: Unable to allocate required resources.
		Action: Free some memory resources and restart.

03	Error	Explanation: Unable to read required registry parameters.
		Action: Reconfigure the adapter team by double-clicking
		the PROSet icon in the control panel.

Table 6. NDIS (Windows NT or Windows 2000) driver teaming messages for the

Ethernet controller.